dmesg - Fedora 18
Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 3.6.10-4.fc18.x86_64 (mockbuild@) (gcc version 4.7.2 20121109 (Red Hat 4.7.2-8) (GCC) ) #1 SMP Tue Dec 11 18:01:27 UTC 2012
Command line: BOOT_IMAGE=/vmlinuz-3.6.10-4.fc18.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
BIOS-e820: [mem 0x0000000040005000-0x00000000d9a59fff] usable
BIOS-e820: [mem 0x00000000d9a5a000-0x00000000da053fff] reserved
BIOS-e820: [mem 0x00000000da054000-0x00000000da2d3fff] ACPI NVS
BIOS-e820: [mem 0x00000000da2d4000-0x00000000da2d8fff] ACPI data
BIOS-e820: [mem 0x00000000da2d9000-0x00000000da31bfff] ACPI NVS
BIOS-e820: [mem 0x00000000da31c000-0x00000000dad31fff] usable
BIOS-e820: [mem 0x00000000dad32000-0x00000000daff1fff] reserved
BIOS-e820: [mem 0x00000000daff2000-0x00000000daffffff] usable
BIOS-e820: [mem 0x00000000db800000-0x00000000df9fffff] reserved
BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000021f5fffff] usable
NX (Execute Disable) protection: active
DMI 2.7 present.
DMI: ECS Z77H2-A2X/Z77H2-A2X, BIOS 4.6.5 03/19/2012
e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x21f600 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-CFFFF write-protect
D0000-E7FFF uncachable
E8000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask E00000000 write-back
1 base 200000000 mask FE0000000 write-back
2 base 0E0000000 mask FE0000000 uncachable
3 base 0DC000000 mask FFC000000 uncachable
4 base 0DB800000 mask FFF800000 uncachable
5 base 21F800000 mask FFF800000 uncachable
6 base 21F600000 mask FFFE00000 uncachable
7 disabled
8 disabled
9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
original variable MTRRs
reg 0, base: 0GB, range: 8GB, type WB
reg 1, base: 8GB, range: 512MB, type WB
reg 2, base: 3584MB, range: 512MB, type UC
reg 3, base: 3520MB, range: 64MB, type UC
reg 4, base: 3512MB, range: 8MB, type UC
reg 5, base: 8696MB, range: 8MB, type UC
reg 6, base: 8694MB, range: 2MB, type UC
total RAM covered: 8110M
Found optimal setting for mtrr clean up
gran_size: 64K chunk_size: 128M num_reg: 9 lose cover RAM: 0G
New variable MTRRs
reg 0, base: 0GB, range: 2GB, type WB
reg 1, base: 2GB, range: 1GB, type WB
reg 2, base: 3GB, range: 512MB, type WB
reg 3, base: 3512MB, range: 8MB, type UC
reg 4, base: 3520MB, range: 64MB, type UC
reg 5, base: 4GB, range: 4GB, type WB
reg 6, base: 8GB, range: 512MB, type WB
reg 7, base: 8694MB, range: 2MB, type UC
reg 8, base: 8696MB, range: 8MB, type UC
e820: update [mem 0xdb800000-0xffffffff] usable ==> reserved
e820: last_pfn = 0xdb000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd20-0x000fcd2f] mapped at [ffff8800000fcd20]
initial memory mapped: [mem 0x00000000-0x1fffffff]
Base memory trampoline at [ffff880000097000] 97000 size 24576
init_memory_mapping: [mem 0x00000000-0xdaffffff]
[mem 0x00000000-0xdaffffff] page 2M
kernel direct mapping tables up to 0xdaffffff @ [mem 0x1fffb000-0x1fffffff]
init_memory_mapping: [mem 0x100000000-0x21f5fffff]
[mem 0x100000000-0x21f5fffff] page 2M
kernel direct mapping tables up to 0x21f5fffff @ [mem 0xdaffa000-0xdaffffff]
RAMDISK: [mem 0x343c2000-0x361d8fff]
ACPI: RSDP 00000000000f0450 00024 (v02 ALASKA)
ACPI: XSDT 00000000da2b0070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
ACPI: FACP 00000000da2bce58 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
ACPI: DSDT 00000000da2b0160 0CCF7 (v02 ALASKA A M I 00000015 INTL 20051117)
ACPI: FACS 00000000da2d2f80 00040
ACPI: APIC 00000000da2bcf50 00092 (v03 ALASKA A M I 01072009 AMI 00010013)
ACPI: MCFG 00000000da2bcfe8 0003C (v01 ALASKA A M I 01072009 MSFT 00000097)
ACPI: HPET 00000000da2bd028 00038 (v01 ALASKA A M I 01072009 AMI. 00000005)
ACPI: SSDT 00000000da2bd060 0036D (v01 SataRe SataTabl 00001000 INTL 20091112)
ACPI: SSDT 00000000da2bd3d0 009AA (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
ACPI: SSDT 00000000da2bdd80 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
ACPI: Local APIC address 0xfee00000
No NUMA configuration found
Faking a node at [mem 0x0000000000000000-0x000000021f5fffff]
Initmem setup node 0 [mem 0x00000000-0x21f5fffff]
NODE_DATA [mem 0x21f5ec000-0x21f5fffff]
[ffffea0000000000-ffffea00087fffff] PMD -> [ffff880216c00000-ffff88021ebfffff] on node 0
Zone ranges:
DMA [mem 0x00010000-0x00ffffff]
DMA32 [mem 0x01000000-0xffffffff]
Normal [mem 0x100000000-0x21f5fffff]
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x00010000-0x0009cfff]
node 0: [mem 0x00100000-0x1fffffff]
node 0: [mem 0x20200000-0x40003fff]
node 0: [mem 0x40005000-0xd9a59fff]
node 0: [mem 0xda31c000-0xdad31fff]
node 0: [mem 0xdaff2000-0xdaffffff]
node 0: [mem 0x100000000-0x21f5fffff]
On node 0 totalpages: 2070538
DMA zone: 64 pages used for memmap
DMA zone: 6 pages reserved
DMA zone: 3911 pages, LIFO batch:0
DMA32 zone: 16320 pages used for memmap
DMA32 zone: 873149 pages, LIFO batch:31
Normal zone: 18392 pages used for memmap
Normal zone: 1158696 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 8 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: 000000000009d000 - 000000000009e000
PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
PM: Registered nosave memory: 0000000020000000 - 0000000020200000
PM: Registered nosave memory: 0000000040004000 - 0000000040005000
PM: Registered nosave memory: 00000000d9a5a000 - 00000000da054000
PM: Registered nosave memory: 00000000da054000 - 00000000da2d4000
PM: Registered nosave memory: 00000000da2d4000 - 00000000da2d9000
PM: Registered nosave memory: 00000000da2d9000 - 00000000da31c000
PM: Registered nosave memory: 00000000dad32000 - 00000000daff2000
PM: Registered nosave memory: 00000000db000000 - 00000000db800000
PM: Registered nosave memory: 00000000db800000 - 00000000dfa00000
PM: Registered nosave memory: 00000000dfa00000 - 00000000f8000000
PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
e820: [mem 0xdfa00000-0xf7ffffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
PERCPU: Embedded 28 pages/cpu @ffff88021f200000 s84288 r8192 d22208 u262144
pcpu-alloc: s84288 r8192 d22208 u262144 alloc=1*2097152
pcpu-alloc: [0] 0 1 2 3 4 5 6 7
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2035756
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.6.10-4.fc18.x86_64 root=/dev/mapper/fedora-root ro rd.lvm.lv=fedora/swap rd.md=0 rd.dm=0 rd.luks=0 vconsole.keymap=us rd.lvm.lv=fedora/root rhgb quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
__ex_table already sorted, skipping sort
xsave: enabled xstate_bv 0x7, cntxt size 0x340
Checking aperture...
No AGP bridge found
Memory: 8037000k/8902656k available (6334k kernel code, 620504k absent, 245152k reserved, 6870k data, 1036k init)
SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
Hierarchical RCU implementation.
RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
NR_IRQS:8448 nr_irqs:744 16
Extended CMOS year: 2000
Console: colour dummy device 80x25
console [tty0] enabled
allocated 33554432 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 3499.946 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 6999.89 BogoMIPS (lpj=3499946)
pid_max: default: 32768 minimum: 301
Security Framework initialized
SELinux: Initializing.
SELinux: Starting in permissive mode
Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
Mount-cache hash table entries: 256
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 9 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 0, 4MB 0
Last level dTLB entries: 4KB 512, 2MB 32, 4MB 32
tlb_flushall_shift is 0x1
ACPI: Core revision 20120711
ftrace: allocating 23489 entries in 92 pages
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM) i7-3770K CPU @ 3.50GHz stepping 09
Performance Events: PEBS fmt1+, 16-deep LBR, IvyBridge events, Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
smpboot: Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 OK
Brought up 8 CPUs
smpboot: Total of 8 processors activated (55999.13 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0xda054000-0xda2d3fff] (2621440 bytes)
PM: Registering ACPI NVS region [mem 0xda2d9000-0xda31bfff] (274432 bytes)
atomic64 test passed for x86-64 platform with CX8 and with SSE
RTC time: 14:59:00, date: 01/20/13
NET: Registered protocol family 16
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
PCI: Using configuration type 1 for base access
bio: create slab at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: EC: Look up EC in DSDT
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: SSDT 00000000da001018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
ACPI: SSDT 00000000da002a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
ACPI: SSDT 00000000da003c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
ACPI: Power Resource [FN00] (off)
ACPI: Power Resource [FN01] (off)
ACPI: Power Resource [FN02] (off)
ACPI: Power Resource [FN03] (off)
ACPI: Power Resource [FN04] (off)
ACPI: No dock devices found.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
_OSC request data:1 8 1f
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
PCI host bridge to bus 0000:00
pci_bus 0000:00: busn_res: [bus 00-3e] is inserted under domain [bus 00-ff]
pci_bus 0000:00: root bus resource [bus 00-3e]
pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: root bus resource [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:00: root bus resource [mem 0x21f600000-0xfffffffff]
pci 0000:00:00.0: [8086:0150] type 00 class 0x060000
pci 0000:00:02.0: [8086:0162] type 00 class 0x030000
pci 0000:00:02.0: reg 10: [mem 0xf7800000-0xf7bfffff 64bit]
pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 10: [mem 0xf7f00000-0xf7f0ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
pci 0000:00:16.0: reg 10: [mem 0xf7f1a000-0xf7f1a00f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 10: [mem 0xf7f18000-0xf7f183ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
pci 0000:00:1b.0: reg 10: [mem 0xf7f10000-0xf7f13fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: [8086:1e14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: [8086:1e18] type 01 class 0x060400
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: [8086:1e1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 10: [mem 0xf7f17000-0xf7f173ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1f.0: [8086:1e44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1e02] type 00 class 0x010601
pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
pci 0000:00:1f.2: reg 24: [mem 0xf7f16000-0xf7f167ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 10: [mem 0xf7f15000-0xf7f150ff 64bit]
pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
pci_bus 0000:01: busn_res: [bus 01-02] is inserted under [bus 00-3e]
pci 0000:01:00.0: [1283:8893] type 01 class 0x060401
pci 0000:01:00.0: supports D1 D2
pci 0000:01:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.0: PCI bridge to [bus 01-02] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:00:1c.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
pci 0000:00:1c.0: bridge window [mem 0x21f600000-0xfffffffff] (subtractive decode)
pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 01-02]
pci 0000:01:00.0: PCI bridge to [bus 02] (subtractive decode)
pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:01:00.0: bridge window [??? 0x00000000 flags 0x0] (subtractive decode)
pci 0000:01:00.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
pci 0000:01:00.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
pci 0000:01:00.0: bridge window [mem 0x21f600000-0xfffffffff] (subtractive decode)
pci_bus 0000:03: busn_res: [bus 03] is inserted under [bus 00-3e]
pci 0000:03:00.0: [1b21:1042] type 00 class 0x0c0330
pci 0000:03:00.0: reg 10: [mem 0xf7e00000-0xf7e07fff 64bit]
pci 0000:03:00.0: PME# supported from D3hot D3cold
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:04: busn_res: [bus 04] is inserted under [bus 00-3e]
pci 0000:04:00.0: [8086:0082] type 00 class 0x028000
pci 0000:04:00.0: reg 10: [mem 0xf7d00000-0xf7d01fff 64bit]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:05: busn_res: [bus 05] is inserted under [bus 00-3e]
pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
pci 0000:05:00.0: reg 10: [io 0xe000-0xe0ff]
pci 0000:05:00.0: reg 18: [mem 0xf0004000-0xf0004fff 64bit pref]
pci 0000:05:00.0: reg 20: [mem 0xf0000000-0xf0003fff 64bit pref]
pci 0000:05:00.0: supports D1 D2
pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: busn_res: [bus 06] is inserted under [bus 00-3e]
pci 0000:06:00.0: [1b21:0612] type 00 class 0x010601
pci 0000:06:00.0: reg 10: [io 0xd050-0xd057]
pci 0000:06:00.0: reg 14: [io 0xd040-0xd043]
pci 0000:06:00.0: reg 18: [io 0xd030-0xd037]
pci 0000:06:00.0: reg 1c: [io 0xd020-0xd023]
pci 0000:06:00.0: reg 20: [io 0xd000-0xd01f]
pci 0000:06:00.0: reg 24: [mem 0xf7c00000-0xf7c001ff]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP07._PRT]
_OSC request data:1 1f 1f
pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *10 11 12 14 15)
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
ACPI: bus type scsi registered
libata version 3.00 loaded.
ACPI: bus type usb registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
e820: reserve RAM buffer [mem 0xd9a5a000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdad32000-0xdbffffff]
e820: reserve RAM buffer [mem 0xdb000000-0xdbffffff]
e820: reserve RAM buffer [mem 0x21f600000-0x21fffffff]
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp 00:00: [bus 00-3e]
pnp 00:00: [io 0x0000-0x0cf7 window]
pnp 00:00: [io 0x0cf8-0x0cff]
pnp 00:00: [io 0x0d00-0xffff window]
pnp 00:00: [mem 0x000a0000-0x000bffff window]
pnp 00:00: [mem 0x000c0000-0x000c3fff window]
pnp 00:00: [mem 0x000c4000-0x000c7fff window]
pnp 00:00: [mem 0x000c8000-0x000cbfff window]
pnp 00:00: [mem 0x000cc000-0x000cffff window]
pnp 00:00: [mem 0x000d0000-0x000d3fff window]
pnp 00:00: [mem 0x000d4000-0x000d7fff window]
pnp 00:00: [mem 0x000d8000-0x000dbfff window]
pnp 00:00: [mem 0x000dc000-0x000dffff window]
pnp 00:00: [mem 0x000e0000-0x000e3fff window]
pnp 00:00: [mem 0x000e4000-0x000e7fff window]
pnp 00:00: [mem 0x000e8000-0x000ebfff window]
pnp 00:00: [mem 0x000ec000-0x000effff window]
pnp 00:00: [mem 0x000f0000-0x000fffff window]
pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
pnp 00:00: [mem 0x21f600000-0xfffffffff window]
pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
pnp 00:01: [mem 0xfed40000-0xfed44fff]
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp 00:02: [io 0x0000-0x001f]
pnp 00:02: [io 0x0081-0x0091]
pnp 00:02: [io 0x0093-0x009f]
pnp 00:02: [io 0x00c0-0x00df]
pnp 00:02: [dma 4]
pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:03: [mem 0xff000000-0xffffffff]
pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
pnp 00:04: [mem 0xfed00000-0xfed003ff]
pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
pnp 00:05: [io 0x002e-0x002f]
pnp 00:05: [io 0x004e-0x004f]
pnp 00:05: [io 0x0061]
pnp 00:05: [io 0x0063]
pnp 00:05: [io 0x0065]
pnp 00:05: [io 0x0067]
pnp 00:05: [io 0x0070]
pnp 00:05: [io 0x0080]
pnp 00:05: [io 0x0092]
pnp 00:05: [io 0x00b2-0x00b3]
pnp 00:05: [io 0x0680-0x069f]
pnp 00:05: [io 0x0200-0x020f]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0xffff]
pnp 00:05: [io 0x0400-0x0453]
pnp 00:05: [io 0x0458-0x047f]
pnp 00:05: [io 0x0500-0x057f]
pnp 00:05: [io 0x164e-0x164f]
system 00:05: [io 0x0680-0x069f] has been reserved
system 00:05: [io 0x0200-0x020f] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0xffff] has been reserved
system 00:05: [io 0x0400-0x0453] has been reserved
system 00:05: [io 0x0458-0x047f] has been reserved
system 00:05: [io 0x0500-0x057f] has been reserved
system 00:05: [io 0x164e-0x164f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: [io 0x0070-0x0077]
pnp 00:06: [irq 8]
pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
pnp 00:07: [io 0x0454-0x0457]
system 00:07: [io 0x0454-0x0457] has been reserved
system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
pnp 00:08: [io 0x0a20-0x0a3f]
pnp 00:08: [io 0x0a30-0x0a3f]
pnp 00:08: [io 0x0a20-0x0a2f]
system 00:08: [io 0x0a20-0x0a3f] has been reserved
system 00:08: [io 0x0a30-0x0a3f] has been reserved
system 00:08: [io 0x0a20-0x0a2f] has been reserved
system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:09: [io 0x0010-0x001f]
pnp 00:09: [io 0x0022-0x003f]
pnp 00:09: [io 0x0044-0x005f]
pnp 00:09: [io 0x0062-0x0063]
pnp 00:09: [io 0x0065-0x006f]
pnp 00:09: [io 0x0072-0x007f]
pnp 00:09: [io 0x0080]
pnp 00:09: [io 0x0084-0x0086]
pnp 00:09: [io 0x0088]
pnp 00:09: [io 0x008c-0x008e]
pnp 00:09: [io 0x0090-0x009f]
pnp 00:09: [io 0x00a2-0x00bf]
pnp 00:09: [io 0x00e0-0x00ef]
pnp 00:09: [io 0x04d0-0x04d1]
system 00:09: [io 0x04d0-0x04d1] has been reserved
system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0a: [io 0x00f0-0x00ff]
pnp 00:0a: [irq 13]
pnp 00:0a: Plug and Play ACPI device, IDs PNP0c04 (active)
pnp 00:0b: [io 0x03f8-0x03ff]
pnp 00:0b: [irq 4]
pnp 00:0b: [dma 0 disabled]
pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
pnp 00:0c: [mem 0xfed10000-0xfed17fff]
pnp 00:0c: [mem 0xfed18000-0xfed18fff]
pnp 00:0c: [mem 0xfed19000-0xfed19fff]
pnp 00:0c: [mem 0xf8000000-0xfbffffff]
pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
pnp 00:0c: [mem 0xfed90000-0xfed93fff]
pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
pnp 00:0c: [mem 0xff000000-0xffffffff]
pnp 00:0c: [mem 0xfee00000-0xfeefffff]
pnp 00:0c: [mem 0xdfa00000-0xdfa00fff]
system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
system 00:0c: [mem 0xdfa00000-0xdfa00fff] has been reserved
system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:0d: [mem 0x20000000-0x201fffff]
pnp 00:0d: [mem 0x40004000-0x40004fff]
system 00:0d: [mem 0x20000000-0x201fffff] has been reserved
system 00:0d: [mem 0x40004000-0x40004fff] has been reserved
system 00:0d: Plug and Play ACPI device, IDs PNP0c01 (active)
pnp: PnP ACPI: found 14 devices
ACPI: ACPI bus type pnp unregistered
pci 0000:01:00.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 01-02]
pci 0000:00:1c.1: PCI bridge to [bus 03]
pci 0000:00:1c.1: bridge window [mem 0xf7e00000-0xf7efffff]
pci 0000:00:1c.2: PCI bridge to [bus 04]
pci 0000:00:1c.2: bridge window [mem 0xf7d00000-0xf7dfffff]
pci 0000:00:1c.4: PCI bridge to [bus 05]
pci 0000:00:1c.4: bridge window [io 0xe000-0xefff]
pci 0000:00:1c.4: bridge window [mem 0xf0000000-0xf00fffff 64bit pref]
pci 0000:00:1c.6: PCI bridge to [bus 06]
pci 0000:00:1c.6: bridge window [io 0xd000-0xdfff]
pci 0000:00:1c.6: bridge window [mem 0xf7c00000-0xf7cfffff]
pci 0000:01:00.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:00: resource 13 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:00: resource 14 [mem 0x21f600000-0xfffffffff]
pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:01: resource 7 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:01: resource 8 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:01: resource 9 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:01: resource 10 [mem 0x000dc000-0x000dffff]
pci_bus 0000:01: resource 11 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:01: resource 12 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:01: resource 13 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:01: resource 14 [mem 0x21f600000-0xfffffffff]
pci_bus 0000:02: resource 8 [io 0x0000-0x0cf7]
pci_bus 0000:02: resource 9 [io 0x0d00-0xffff]
pci_bus 0000:02: resource 10 [mem 0x000a0000-0x000bffff]
pci_bus 0000:02: resource 11 [mem 0x000d0000-0x000d3fff]
pci_bus 0000:02: resource 12 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:02: resource 13 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:02: resource 14 [mem 0x000dc000-0x000dffff]
pci_bus 0000:02: resource 15 [mem 0x000e0000-0x000e3fff]
pci_bus 0000:02: resource 16 [mem 0x000e4000-0x000e7fff]
pci_bus 0000:02: resource 17 [mem 0xdfa00000-0xfeafffff]
pci_bus 0000:02: resource 18 [mem 0x21f600000-0xfffffffff]
pci_bus 0000:03: resource 1 [mem 0xf7e00000-0xf7efffff]
pci_bus 0000:04: resource 1 [mem 0xf7d00000-0xf7dfffff]
pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
pci_bus 0000:05: resource 2 [mem 0xf0000000-0xf00fffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0xd000-0xdfff]
pci_bus 0000:06: resource 1 [mem 0xf7c00000-0xf7cfffff]
NET: Registered protocol family 2
TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 524288 bind 65536)
TCP: reno registered
UDP hash table entries: 4096 (order: 5, 131072 bytes)
UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
NET: Registered protocol family 1
pci 0000:00:02.0: Boot video device
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 30812k freed
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0xd5a5a000-0xd9a59fff] (64MB) mapped at [ffff8800d5a5a000-ffff8800d9a59fff]
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
Initialise module verification
audit: initializing netlink socket (disabled)
type=2000 audit(1358693940.536:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 15757
SELinux: Registering netfilter hooks
alg: No test for stdrng (krng)
NET: Registered protocol family 38
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
vesafb: mode is 1920x1080x32, linelength=7680, pages=0
vesafb: scrolling: redraw
vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005600000, using 8128k, total 8128k
Console: switching to colour frame buffer device 240x67
fb0: VESA VGA frame buffer device
intel_idle: MWAIT substates: 0x1120
intel_idle: v0.4 model 0x3A
intel_idle: lapic_timer_reliable_states 0xffffffff
input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
ACPI: Power Button [PWRF]
ACPI: Fan [FAN0] (off)
ACPI: Fan [FAN1] (off)
ACPI: Fan [FAN2] (off)
ACPI: Fan [FAN3] (off)
ACPI: Fan [FAN4] (off)
ACPI: Requesting acpi_cpufreq
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [TZ00] (28 C)
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [TZ01] (30 C)
GHES: HEST is not enabled!
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:0b: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3f impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16200 irq 40
ata4: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16280 irq 40
ata5: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16300 irq 40
ata6: SATA max UDMA/133 abar m2048@0xf7f16000 port 0xf7f16380 irq 40
ahci 0000:06:00.0: irq 41 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:06:00.0: AHCI 0001.0200 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
ahci 0000:06:00.0: flags: 64bit ncq sntf stag led clo pmp pio slum part ccc sxs
scsi6 : ahci
scsi7 : ahci
ata7: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00100 irq 41
ata8: SATA max UDMA/133 abar m512@0xf7c00000 port 0xf7c00180 irq 41
libphy: Fixed MDIO Bus: probed
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.0: setting latency timer to 64
ehci_hcd 0000:00:1a.0: EHCI Host Controller
ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.0: debug port 2
ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7f18000
ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 3.6.10-4.fc18.x86_64 ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci_hcd 0000:00:1d.0: setting latency timer to 64
ehci_hcd 0000:00:1d.0: EHCI Host Controller
ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.0: debug port 2
ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf7f17000
ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 3.6.10-4.fc18.x86_64 ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
uhci_hcd: USB Universal Host Controller Interface driver
xhci_hcd 0000:00:14.0: setting latency timer to 64
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7f00000
xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.6.10-4.fc18.x86_64 xhci_hcd
usb usb3: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.6.10-4.fc18.x86_64 xhci_hcd
usb usb4: SerialNumber: 0000:00:14.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:03:00.0: irq 17, io mem 0xf7e00000
xhci_hcd 0000:03:00.0: irq 43 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 44 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 45 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 46 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 47 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 48 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 49 for MSI/MSI-X
xhci_hcd 0000:03:00.0: irq 50 for MSI/MSI-X
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 3.6.10-4.fc18.x86_64 xhci_hcd
usb usb5: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
xhci_hcd 0000:03:00.0: xHCI Host Controller
xhci_hcd 0000:03:00.0: new USB bus registered, assigned bus number 6
usb usb6: New USB device found, idVendor=1d6b, idProduct=0003
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: xHCI Host Controller
usb usb6: Manufacturer: Linux 3.6.10-4.fc18.x86_64 xhci_hcd
usb usb6: SerialNumber: 0000:03:00.0
xHCI xhci_add_endpoint called for root hub
xHCI xhci_check_bandwidth called for root hub
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial
usbcore: registered new interface driver usbserial_generic
USB Serial support registered for generic
i8042: PNP: No PS/2 controller found. Probing ports directly.
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:06: RTC can wake from S4
rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: dm-devel@redhat.com
cpuidle: using governor ladder
cpuidle: using governor menu
EFI Variables Facility v0.08 2004-May-17
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
drop_monitor: Initializing network drop monitor service
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
PM: Hibernation image not present or could not be loaded.
Loading module verification certificates
MODSIGN: Loaded cert 'Fedora kernel signing key: 7686e1f22bbf511e76885be3fb6c7a462be60dda'
registered taskstats version 1
Magic number: 13:398:991
machinecheck machinecheck4: hash matches
rtc_cmos 00:06: setting system clock to 2013-01-20 14:59:01 UTC (1358693941)
ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
ata6: SATA link down (SStatus 0 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1: SATA link down (SStatus 0 SControl 300)
usb 1-1: new high-speed USB device number 2 using ehci_hcd
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: ATA-8: OCZ-VERTEX2, 1.10, max UDMA/133
ata4.00: 117231408 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
usb 1-1: New USB device found, idVendor=8087, idProduct=0024
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
ata4.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
ata4.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
ata4.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
ata4.00: configured for UDMA/133
scsi 3:0:0:0: Direct-Access ATA OCZ-VERTEX2 1.10 PQ: 0 ANSI: 5
sd 3:0:0:0: Attached scsi generic sg0 type 0
sd 3:0:0:0: [sda] 117231408 512-byte logical blocks: (60.0 GB/55.8 GiB)
sd 3:0:0:0: [sda] Write Protect is off
sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
sd 3:0:0:0: [sda] Attached SCSI disk
usb 2-1: new high-speed USB device number 2 using ehci_hcd
usb 2-1: New USB device found, idVendor=8087, idProduct=0024
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
usb 3-1: new high-speed USB device number 2 using xhci_hcd
tsc: Refined TSC clocksource calibration: 3500.024 MHz
Switching to clocksource tsc
ata8: SATA link down (SStatus 0 SControl 300)
Freeing unused kernel memory: 1036k freed
Write protecting the kernel read-only data: 12288k
Freeing unused kernel memory: 1848k freed
Freeing unused kernel memory: 1412k freed
systemd[1]: systemd 195 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +IMA +SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; fedora)
systemd[1]: Running in initial RAM disk.
systemd[1]: No hostname configured.
systemd[1]: Set hostname to .
systemd[1]: Initializing machine ID from random generator.
systemd[1]: Starting Encrypted Volumes.
systemd[1]: Reached target Encrypted Volumes.
systemd[1]: Starting udev Kernel Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Starting udev Control Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Starting Journal Socket.
systemd[1]: Listening on Journal Socket.
systemd[1]: Started Load Kernel Modules.
systemd[1]: Starting Journal Service...
systemd[1]: Started Journal Service.
systemd[1]: Starting Sockets.
systemd[1]: Reached target Sockets.
systemd[1]: Starting dracut cmdline hook...
systemd[1]: Starting Swap.
systemd[1]: Reached target Swap.
systemd[1]: Starting Local File Systems.
systemd[1]: Reached target Local File Systems.
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
systemd-udevd[219]: starting version 195
usb 3-1: New USB device found, idVendor=174c, idProduct=55aa
usb 3-1: New USB device strings: Mfr=2, Product=3, SerialNumber=1
usb 3-1: Product: RVS02 SuperSpeed
usb 3-1: Manufacturer: SST
usb 3-1: SerialNumber: 0000000000000001BA
usb 3-1: ep 0x81 - rounding interval to 32768 microframes, ep desc says 0 microframes
usb 3-1: ep 0x2 - rounding interval to 32768 microframes, ep desc says 0 microframes
Initializing USB Mass Storage driver...
scsi8 : usb-storage 3-1:1.0
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
hub 3-0:1.0: unable to enumerate USB device on port 2
wmi: Mapper loaded
r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
r8169 0000:05:00.0: irq 51 for MSI/MSI-X
r8169 0000:05:00.0: eth0: RTL8168evl/8111evl at 0xffffc900055b4000, c8:9c:dc:ee:a3:59, XID 0c900800 IRQ 51
r8169 0000:05:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[drm] Initialized drm 1.1.0 20060810
pci 0000:00:00.0: Intel Ivybridge Chipset
pci 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
pci 0000:00:00.0: detected 65536K stolen memory
checking generic (e0000000 7f0000) vs hw (e0000000 10000000)
fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
ACPI: Invalid Power Resource to register!
Console: switching
to colour dummy device 80x25
i915 0000:00:02.0: setting latency timer to 64
systemd-udevd[274]: renamed network interface eth0 to p4p1
i915 0000:00:02.0: irq 52 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
usb 3-3: new full-speed USB device number 4 using xhci_hcd
[drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
usb 3-3: New USB device found, idVendor=0566, idProduct=3015
usb 3-3: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-3: Product: USB KEYBOARD
usb 3-3: Manufacturer: ELAN
usb 3-3: ep 0x82 - rounding interval to 64 microframes, ep desc says 80 microframes
input: ELAN USB KEYBOARD as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.0/input/input2
hid-generic 0003:0566:3015.0001: input,hidraw0: USB HID v1.10 Keyboard [ELAN USB KEYBOARD] on usb-0000:00:14.0-3/input0
hid-generic 0003:0566:3015.0002: usage index exceeded
hid-generic 0003:0566:3015.0002: item 0 2 2 2 parsing failed
hid-generic: probe of 0003:0566:3015.0002 failed with error -22
fbcon: inteldrmfb (fb0) is primary device
usb 3-4: new full-speed USB device number 5 using xhci_hcd
usb 3-4: New USB device found, idVendor=0403, idProduct=6001
usb 3-4: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 3-4: Product: FT232R USB UART
usb 3-4: Manufacturer: FTDI
usb 3-4: SerialNumber: A800fq8V
usb 1-1.1: new full-speed USB device number 3 using ehci_hcd
Console: switching to colour frame buffer device 240x67
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
acpi device:4a: registered as cooling_device13
ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
usb 1-1.1: New USB device found, idVendor=0cf3, idProduct=3000
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usb 1-1.2: new high-speed USB device number 4 using ehci_hcd
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
usb 1-1.2: New USB device found, idVendor=13d3, idProduct=3346
usb 1-1.2: New USB device strings: Mfr=16, Product=32, SerialNumber=48
usb 1-1.2: Product: UB93
usb 1-1.2: Manufacturer: ATHEROS
usb 1-1.2: SerialNumber: 12345
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
scsi 8:0:0:0: Direct-Access ASMT 2105 0 PQ: 0 ANSI: 5
sd 8:0:0:0: Attached scsi generic sg1 type 0
sd 8:0:0:0: [sdb] Attached SCSI removable disk
systemd-journald[124]: Received SIGTERM
type=1404 audit(1358693943.934:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
SELinux: 2048 avtab hash slots, 93843 rules.
SELinux: 2048 avtab hash slots, 93843 rules.
SELinux: 9 users, 15 roles, 4356 types, 237 bools, 1 sens, 1024 cats
SELinux: 83 classes, 93843 rules
SELinux: Completing initialization.
SELinux: Setting up existing superblocks.
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
SELinux: initialized (dev proc, type proc), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
SELinux: initialized (dev devpts, type devpts), uses transition SIDs
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
SELinux: initialized (dev rpc_pipefs, type rpc_pipefs), uses genfs_contexts
SELinux: initialized (dev dm-1, type ext4), uses xattr
type=1403 audit(1358693944.078:3): policy loaded auid=4294967295 ses=4294967295
systemd[1]: Successfully loaded SELinux policy in 148ms 252us.
systemd[1]: Relabelled /dev and /run in 20ms 194us.
SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
usb 3-2: new full-speed USB device number 6 using xhci_hcd
usb 3-2: New USB device found, idVendor=1532, idProduct=0101
usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 3-2: Product: Razer Copperhead Laser Mouse
usb 3-2: Manufacturer: Razer
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.0/input/input4
hid-generic 0003:1532:0101.0003: input,hidraw1: USB HID v1.00 Mouse [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2/input0
input: Razer Razer Copperhead Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-2/3-2:1.1/input/input5
hid-generic 0003:1532:0101.0004: input,hidraw2: USB HID v0.01 Keyboard [Razer Razer Copperhead Laser Mouse] on usb-0000:00:14.0-2/input1
systemd-udevd[473]: starting version 195
mei 0000:00:16.0: setting latency timer to 64
mei 0000:00:16.0: irq 53 for MSI/MSI-X
cfg80211: Calling CRDA to update world regulatory domain
ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
lpc_ich: Resource conflict(s) found affecting gpio_ich
Intel(R) Wireless WiFi driver for Linux, in-tree:d
Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:04:00.0: pci_resource_len = 0x00002000
iwlwifi 0000:04:00.0: pci_resource_base = ffffc900055d8000
iwlwifi 0000:04:00.0: HW Revision ID = 0x34
iwlwifi 0000:04:00.0: irq 54 for MSI/MSI-X
microcode: CPU0 sig=0x306a9, pf=0x2, revision=0x10
mei 0000:00:16.0: wd: failed to find the client
ACPI Warning: 0x000000000000f040-0x000000000000f05f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
Bluetooth: Core ver 2.16
NET: Registered protocol family 31
Bluetooth: HCI device and connection manager initialized
Bluetooth: HCI socket layer initialized
Bluetooth: L2CAP socket layer initialized
Bluetooth: SCO socket layer initialized
usbcore: registered new interface driver ftdi_sio
USB Serial support registered for FTDI USB Serial Device
ftdi_sio 3-4:1.0: FTDI USB Serial Device converter detected
usb 3-4: Detected FT232RL
usb 3-4: Number of endpoints 2
usb 3-4: Endpoint 1 MaxPacketSize 64
usb 3-4: Endpoint 2 MaxPacketSize 64
usb 3-4: Setting MaxPacketSize 64
usb 3-4: FTDI USB Serial Device converter now attached to ttyUSB0
ftdi_sio: v1.6.0:USB FTDI Serial Converters Driver
snd_hda_intel 0000:00:1b.0: irq 55 for MSI/MSI-X
usb 1-1.2: ath9k_htc: Firmware htc_9271.fw requested
usbcore: registered new interface driver ath9k_htc
iTCO_vendor_support: vendor-support=0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
cfg80211: World regulatory domain updated:
cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
microcode: CPU0 updated to revision 0x13, date = 2012-07-16
iwlwifi 0000:04:00.0: loaded firmware version 18.168.6.1
microcode: CPU1 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU1 updated to revision 0x13, date = 2012-07-16
microcode: CPU2 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU2 updated to revision 0x13, date = 2012-07-16
microcode: CPU3 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU3 updated to revision 0x13, date = 2012-07-16
microcode: CPU4 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU4 updated to revision 0x13, date = 2012-07-16
microcode: CPU5 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU5 updated to revision 0x13, date = 2012-07-16
microcode: CPU6 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU6 updated to revision 0x13, date = 2012-07-16
microcode: CPU7 sig=0x306a9, pf=0x2, revision=0x10
microcode: CPU7 updated to revision 0x13, date = 2012-07-16
microcode: Microcode Update Driver: v2.00 , Peter Oruba
iwldvm: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
iwldvm: Copyright(c) 2003-2012 Intel Corporation
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUG enabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
iwlwifi 0000:04:00.0: CONFIG_IWLWIFI_P2P disabled
iwlwifi 0000:04:00.0: Detected Intel(R) Centrino(R) Advanced-N 6205 AGN, REV=0xB0
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:04:00.0: device EEPROM VER=0x715, CALIB=0x6
iwlwifi 0000:04:00.0: Device SKU: 0x1F0
iwlwifi 0000:04:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
Registered led device: phy0-led
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
EXT4-fs (dm-1): re-mounted. Opts: (null)
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky
SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
usbcore: registered new interface driver ath3k
usb 1-1.1: USB disconnect, device number 3
usb 1-1.2: ath9k_htc: Transferred FW: htc_9271.fw, size: 51272
Adding 8142844k swap on /dev/mapper/fedora-swap. Priority:-1 extents:1 across:8142844k SS
ALSA sound/pci/hda/patch_realtek.c:1273 SKU: Nid=0x1d sku_cfg=0x4005e601
ALSA sound/pci/hda/patch_realtek.c:1275 SKU: port_connectivity=0x1
ALSA sound/pci/hda/patch_realtek.c:1276 SKU: enable_pcbeep=0x0
ALSA sound/pci/hda/patch_realtek.c:1277 SKU: check_sum=0x00000005
ALSA sound/pci/hda/patch_realtek.c:1278 SKU: customization=0x000000e6
ALSA sound/pci/hda/patch_realtek.c:1279 SKU: external_amp=0x0
ALSA sound/pci/hda/patch_realtek.c:1280 SKU: platform_type=0x0
ALSA sound/pci/hda/patch_realtek.c:1281 SKU: swap=0x0
ALSA sound/pci/hda/patch_realtek.c:1282 SKU: override=0x1
ALSA sound/pci/hda/hda_auto_parser.c:322 autoconfig: line_outs=3 (0x14/0x15/0x16/0x0/0x0) type:line
ALSA sound/pci/hda/hda_auto_parser.c:326 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:330 hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
ALSA sound/pci/hda/hda_auto_parser.c:331 mono: mono_out=0x0
ALSA sound/pci/hda/hda_auto_parser.c:334 dig-out=0x11/0x1e
ALSA sound/pci/hda/hda_auto_parser.c:335 inputs:
ALSA sound/pci/hda/hda_auto_parser.c:339 Rear Mic=0x18
ALSA sound/pci/hda/hda_auto_parser.c:339 Front Mic=0x19
ALSA sound/pci/hda/hda_auto_parser.c:339 Line=0x1a
ALSA sound/pci/hda/patch_realtek.c:1336 realtek: No valid SSID, checking pincfg 0x4005e601 for NID 0x1d
ALSA sound/pci/hda/patch_realtek.c:1352 realtek: Enabling init ASM_ID=0xe601 CODEC_ID=10ec0892
input: HDA Intel PCH HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
input: HDA Intel PCH Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
input: HDA Intel PCH Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
input: HDA Intel PCH Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
input: HDA Intel PCH Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
input: HDA Intel PCH Line Out CLFE as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
input: HDA Intel PCH Line Out Surround as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
input: HDA Intel PCH Line Out Front as /devices/pci0000:00/0000:00:1b.0/sound/card0/input14
ath9k_htc 1-1.2:1.0: ath9k_htc: HTC initialized with 33 credits
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev sda1, type ext4), uses xattr
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
SELinux: initialized (dev dm-2, type ext4), uses xattr
ath9k_htc 1-1.2:1.0: ath9k_htc: FW Version: 1.3
ath: EEPROM regdomain: 0x60
ath: EEPROM indicates we should expect a direct regpair map
ath: Country alpha2 being used: 00
ath: Regpair used: 0x60
ieee80211 phy1: Atheros AR9271 Rev:1
Registered led device: ath9k_htc-phy1
ip6_tables: (C) 2000-2006 Netfilter Core Team
Ebtables v2.0 registered
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Loading iSCSI transport class v2.0-870.
iscsi: registered transport (tcp)
iscsi: registered transport (iser)
libcxgbi:libcxgbi_init_module: tag itt 0x1fff, 13 bits, age 0xf, 4 bits.
libcxgbi:ddp_setup_host_page_size: system PAGE 4096, ddp idx 0.
Chelsio T3 iSCSI Driver cxgb3i v2.0.0 (Jun. 2010)
iscsi: registered transport (cxgb3i)
Chelsio T4 iSCSI Driver cxgb4i v0.9.1 (Aug. 2010)
iscsi: registered transport (cxgb4i)
systemd-journald[601]: Received SIGUSR1
cnic: Broadcom NetXtreme II CNIC Driver cnic v2.5.12 (June 29, 2012)
Broadcom NetXtreme II iSCSI Driver bnx2i v2.7.2.2 (Apr 25, 2012)
iscsi: registered transport (bnx2i)
iscsi: registered transport (be2iscsi)
usb 1-1.1: new full-speed USB device number 5 using ehci_hcd
IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
usb 1-1.1: New USB device found, idVendor=0b05, idProduct=179c
usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
usbcore: registered new interface driver btusb
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
iwlwifi 0000:04:00.0: L1 Disabled; Enabling L0S
iwlwifi 0000:04:00.0: Radio type=0x1-0x2-0x0
IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
r8169 0000:05:00.0: p4p1: link down
r8169 0000:05:00.0: p4p1: link down
IPv6: ADDRCONF(NETDEV_UP): p4p1: link is not ready
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
r8169 0000:05:00.0: p4p1: link up
IPv6: ADDRCONF(NETDEV_CHANGE): p4p1: link becomes ready
fuse init (API version 7.20)
SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
systemd-udevd[4499]: starting version 197